­
Badger Tool Belt Framer Set - Hardware & General
Created with Sketch. Created with Sketch.
  • 0
    • 1300 942 380
    Store Locations
    Articles & Blogs
  • Badger Tool Belt Framer Set
    • Badger Tool Belt Framer Set
    Badger Tool Belt Framer Set
    Description

    Badger’s take on the big American framing rig, the FSU. The Framer Set will provide plenty of room for your tools and fasteners while cutting back on trips to refill. All Framing Sets come with a contoured belt with metal COBRA® buckle to help support and distribute the added weight framers are required to carry. Currently all FSU sets come in our XL size bags. We feel it suits the needs of the professional framer best in this size. These are our longest bags at about 17″ from top to bottom. Keep that in mind if length is a concern.

    The dominant side features a tape pouch, 5 tool slots in main pouch (three along the inside back and two inside of front), two stacked lower pouches with a tool slot in the middle one, rear tool loop and a pencil/utility combo up front with three narrow slots and one deep pocket.

    The non-dominant side features a tape pouch with 4 interior 1″ wide elastic slots, speed square slot in main pouch with wide tool slot below, fastener pouch with slot, lower fastener pouch, two front tool pockets, 2 stacked rear tool slots and a reinforced bar sleeve on the underside of the bag.

    Available in Sawdust Sage & Gunmetal Grey pouches, both come with a black belt

    BELT SIZING GUIDE

    To ensure you get the belt that will offer you the most flexibility, it’s important that you read and follow these instructions. DO NOT base your choice on your pants size. Take a string or tape measure and measure snugly where you plan to wear your tool belt. Belts are typically worn on the hips. This area tends to be wider than where your pants sit. For example, I wear a size 33” waist jeans. But I measure a 37” around my hips, where I like to wear my tool belt. Keep in mind your working conditions. If you work outside in all seasons, layers will increase your circumference. 

    Our belts have around four or five inches of flexibility for the best fit. This is more than enough for most people. For an optimal fit, there should be 2″ to a max of 6″ of open space between your belt ends. For instance, if your measurement is 36”, you should go with a MD belt which will leave about 3” of open space. Keep in mind, if you prefer your bags to sit further back, order on the small side. If you have doubts, please contact us so we can confirm what will work best for you.

    SIZE
    BELT PAD LENGTH
    BELT HEIGHT MEASUREMENT
    Extra Small
    Order Custom
    Order Custom
    Small
    29″
    31″–35″
    Medium
    33″
    35″–39″
    Large
    37″
    39″–43″
    X-Large
    41″
    43″–47″
    XX-Large
    45″
    47″–51″
    XXX-Large
    49″
    51″–55″

     

     

    For any questions or assistance please call 02 8456 1288

    SKU:
    402295
    Weight:
    3.21 KGS
    Reviews (0)
    Write a Review
    Badger Tool Belts
    No reviews

    Badger Tool Belt Framer Set

    $700.00
    Description

    Badger’s take on the big American framing rig, the FSU. The Framer Set will provide plenty of room for your tools and fasteners while cutting back on trips to refill. All Framing Sets come with a contoured belt with metal COBRA® buckle to help support and distribute the added weight framers are required to carry. Currently all FSU sets come in our XL size bags. We feel it suits the needs of the professional framer best in this size. These are our longest bags at about 17″ from top to bottom. Keep that in mind if length is a concern.

    The dominant side features a tape pouch, 5 tool slots in main pouch (three along the inside back and two inside of front), two stacked lower pouches with a tool slot in the middle one, rear tool loop and a pencil/utility combo up front with three narrow slots and one deep pocket.

    The non-dominant side features a tape pouch with 4 interior 1″ wide elastic slots, speed square slot in main pouch with wide tool slot below, fastener pouch with slot, lower fastener pouch, two front tool pockets, 2 stacked rear tool slots and a reinforced bar sleeve on the underside of the bag.

    Available in Sawdust Sage & Gunmetal Grey pouches, both come with a black belt

    BELT SIZING GUIDE

    To ensure you get the belt that will offer you the most flexibility, it’s important that you read and follow these instructions. DO NOT base your choice on your pants size. Take a string or tape measure and measure snugly where you plan to wear your tool belt. Belts are typically worn on the hips. This area tends to be wider than where your pants sit. For example, I wear a size 33” waist jeans. But I measure a 37” around my hips, where I like to wear my tool belt. Keep in mind your working conditions. If you work outside in all seasons, layers will increase your circumference. 

    Our belts have around four or five inches of flexibility for the best fit. This is more than enough for most people. For an optimal fit, there should be 2″ to a max of 6″ of open space between your belt ends. For instance, if your measurement is 36”, you should go with a MD belt which will leave about 3” of open space. Keep in mind, if you prefer your bags to sit further back, order on the small side. If you have doubts, please contact us so we can confirm what will work best for you.

    SIZE
    BELT PAD LENGTH
    BELT HEIGHT MEASUREMENT
    Extra Small
    Order Custom
    Order Custom
    Small
    29″
    31″–35″
    Medium
    33″
    35″–39″
    Large
    37″
    39″–43″
    X-Large
    41″
    43″–47″
    XX-Large
    45″
    47″–51″
    XXX-Large
    49″
    51″–55″

     

     

    For any questions or assistance please call 02 8456 1288

    SKU:
    402295
    Weight:
    3.21 KGS
    Reviews (0)
    Write a Review